Everytime i try to download the drivers and other software i get the error message
exe can't be downloaded securely
What is going on?
↧
Canon Maxify MB2720 Driver Error Message
↧
Canon Maxify MB2720 Ink Cartridge Change
My black ink is streaky, i would like to change the cartridge, but the printer will not allow it. How do I make the printer recognize that the cartridge needs to be replaced?
↧
↧
Color imageCLASS MF726Cdw.
The yellow toner ink cartridge bleeds on to each print sheet.
Please, provide instructions to stop the ink bleed?
I own the Color imageCLASS MF726Cdw.
↧
MF644cdw Test Print error
My MF644cdw is connected via wifi. I have 2 Windows 10 PCs connected to it. One can print to the MF644 just fine. The other was working until recently, even test print fails. I have another Canon Prixma and that one works fine.
I tried installing the latest driver for the MF644 but that did not help. I couldn't find what error code it was when it failed even with the test print.
Any suggestions on how to debug this?
↧
Can't print multiple copies at one
Hello.
Am not able to print multiple copies with my Canon printer. When I switch from sorted to grouped it prints, but why is this?
I have readed the internet and people are saying to disable the mopier mode. Where is located the mopier mode on Canon settings?
Am not able to print multiple copies with my Canon printer. When I switch from sorted to grouped it prints, but why is this?
I have readed the internet and people are saying to disable the mopier mode. Where is located the mopier mode on Canon settings?
↧
↧
MF624Cw ImageClass Will Print Wirelessly but Not Scan
I can print wirelessly from my laptop to the printer, so I know there is a wireless connection working. But I have never been able to scan from the printer direct from the printer to the laptop. I have to use the intermediate step of scanning to a thumb drive. Whenever I try this I get the message "Connect the Computer." Is it simply not possible to scan directly even though I can print? Or is there a step I'm missing? Again, I can PRINT wirelessly so I know the connection exists.
This is a simple wireless home connection with a Windows 10 laptop.
↧
Canon imagePROGRAF PRO-1000 and Paper Premium Arctic matte or paper suggestion.
Good morning
I'm trying to print blue prints on finestra art premium artic matte. Whenever I choose paper type of "Matte Photo Paper" I keep getting an error about wide margins.
What's the paper that I should choose then when attempting to print. Or maybe I should use a different type of paper ?
I want a poster quality on my prints.
thank you all for the help
↧
Canon MB2720 Black Half Missing
My Canon MB2720 is printing only half the black. See the alignment page below. Tried to clean the timing strip as suggested by another post but the problem persists. In that thread, same issue was experienced by another user. His alignment printout looked exactly same as mine.
↧
MF4770n - Can't Connect Scanner
The machine prints all day long , but it does not connect for scanning. I get the "Connect computer" message in the machines window, It is connected by a WLAN to a Mac. Thanks for any thoughts!
↧
↧
Canon MF726CDW paper jam
Hello,
I have a problem with MF726FCDW. It always jams paper. No matter what feeder I use.
The paper passes the roller displayed :
But it seems the next rollers do not pull up it further so paper stucks partially after the roller imaged above. It is near to always and priner is near to be unusable.
Thank you for any help.
↧
Canon imageCLASS mf269dw Auto-Duplexing Broken
I recently bought a brand-new mf269dw. Single-sided printing works fine, but I get a phantom paper jam error every time I try duplex printing. (It throws an error, but I can't find a paper jam.) The real problem seems to be that after printing on the first side of a sheet, the printer can't feed it back in for a second pass. It tries to pull the sheet back in, but that doesn't work for some reason.
What can I do to fix this?
↧
Pixma MF5720 Won't use black to print monochrome
Hello all, does anyone know how to make this printer use black to print monochrome? It stopped using the black ink after I did an update a couple of years ago. Now I keep running out of magenta and cyan even though I mostly try to print black and white.
Thank you
↧
LBP622Cdw mac driver problem
I have the Color Image Class LBP622Cdw connected to my Mac. The official driver doesn't include this printer and the closest one is LBP622C that doesn't look like my computer nor does it have an option to print black and white.
Any ideas?
↧
↧
Canon ImageCLASS MF726 CDW COPY or SCAN function outputs blank page but PRINT function is O.K.
I bought a brand new MF726 CDW in 2016. But I did not open until a year later. The COPY or SCAN function outputs a blank page while the print function is O.K. I notice that the scanning light in Platen Glass never lid up even though the motor and bell are still moving the whole scanning assembly at Platen Glass. I google and it was suggested to update new firmware for other MF model. I tried to update new firmware on my MF726 and it did not help. Since then I only use PRINT function. I am wondering what might have gone wrong with the brand new MF 726? Thanks and regards.
↧
MF644CDW Scanning paper feeder crumpling source paper
When the paper feeder pulls in the paper to scan, it does not pull the paper in properly.. instead of going in flat and smoothly, the paper slightly lifts on the sides, folding the paper slightly upward and towards the centre... the result is a skewed scan result image and the original copy having crumpled/torn sides (the impression of the torn sides is similar to how gears would crumple the side of a paper if it got caught in them).
↧
MF236n Feeder Issues
I use the top feeder tray for scanning multiple pages. All of a sudden after scanning previous documents from the feeder tray, I started my next scanning project and when I place paper in the feeder tray the printer beeps acknowledging the paper is in the feeder tray. On the MF Scan Utility, I select the Document button to start the scanning job, the printer does not feed or scan the documents in the feeder tray, the printer starts to scan the platen glass and not the feeder. I have the utility set for Auto Mode. I changed the Auto Mode the Feeder and the same thing happens.
Suggestions?
↧
canon printer 5950dw
when I make a copy I get either a smudge or a actual smudged number on the right side of the copy. I use the machine for business, and its becoming a big problem. I cleaned the glass and the white plastic above the glass and that didnt help.
thank you
↧
↧
imageCLASS MF269dw text quality issues
Hello,
I've recently purchased an imageCLASS MF269dw and I'm on the verge of returning it because I'm not satisfied with the text quality when printing. Text is not as dark or as sharp as I would expect from a laser printer. I thought that it should print perfectly out-of-the-box with the default settings, but if someone has some suggestions as to what settings I can change, that would be great. I've gone through all of the menus and settings on the printer that I can think of, but nothing seems to make any difference. I am using a Mac with OS 10.15.7, by the way. This printer seems to get great reviews from a lot of sources, including Consumer Reports where they say the text quality is excellent, so I'm not sure if I'm doing something wrong with it or not.
Thanks!
↧
Printing Non Text Documents - Unreadable text
I have just bought an IMAGE CLASS MF267DF. If I print a word text document the quality is acceptable. However printing anything else for example a web page where the text is not black, results in an unreadable faint mess.
Can I set this printer to just print monochrome ? As greyscale comes out too faint to read anything. Even better I would have hoped that the printer should have a setting where I can tell it to just treat text as monochrome at least, how are other people printing for exmaple yellow text ? Are you processing the image before printing somehow ?
Any help would be great, or I thnk I'll send it back.
↧
Need simple solution to reconnect Scangear to Imagerunners in different Offices that laptop goes to.
So I have several laptops that move between offices. Offices have Imagerunner Adv 5355II. Scanning is used heavily from the Imagerunners to the laptops.
It is bulky to open up scangear and then remember the IP address for the Imagerunner in that office and then change to that machine.
I am currious if I can use run command and run scangear with attributes or creat a script so that I have Icons for each office and when the user clicks it, they are automatically connecting scangear to the Imagerunner in that office.
Short is wanting a one click sollution for floating laptops to easily connect to Imagerunners in differnt offices so as to be able to scan.
Thank You
↧